IDLS - Intelligent Dome Light System
Product No. 2 55001 - Technical Specifications
Rectangular Low Profile Dome Light - Description
The IDLS LED based dome light is designed to provide general purpose illumination within armored vehicles. Two operation modes are available, WHITE light mode and BLUE light mode.
The design utilizes solid state technology and constant current drive circuitry to achieve a consistent and power economical light output at an input voltage range of 16...33VDC.
The IDLS control circuitry is based on a microcontroller which executes all functionalities of the module.
Operation mode is selectable by a 3 state toggle switch.
Light intensity is controllable from 1% to 100%.
The product is designed to meet the rigorous requirements of military ground vehicle environments.
Features
* Two light colors available - White and Blue selectable through a toggle switch.
* Simple mounting – Mounted by 4 screw holes located in the product base.
* Receptacle type – The unit utilizes a NSN 5935-00-622-4948 receptacle.
* White illumination – At a distance of 1m from target, the lamp provides a main illumination footprint
in an area larger than 1m x 1m, with a value greater than 45Lux on 0-0 axis
dropping to 25Lux at the edges.
* Dimming control – dimming is enabled by a potentiometer located on the product.
Product No. 2 55001 – Datasheet |
Light Output - White / Blue |
Input Voltage |
16-33VDC |
Input Current |
200mA |
Power Consumption at 24V |
4.8 Watts |
Input Over Voltage Protection |
Included |
Input Reverse Voltage Protection |
Included |
Built-In EMI RFI Filter, Low Noise |
MIL-STD-461E |
Light Source |
LEDs |
White Light Output (at 1 meter) |
Minimum 45Lux @ Center |
Blue Light Output (at 1 meter) |
Minimum 8Lux @ Center |
Dominant Wavelength (Blue) |
465nm |
Light Beam Angle |
100° |
Intensity control (White & Blue) |
1-100% |
Operating Temperature Range |
-40°C to +71°C |
Dimensions (L x W x H) mm (inch) |
178 (7.00) x 150 (5.90) x 33 (1.29) |
Weight |
540g (1.20lbs) |
Receptacle Pin-out:
|
Functional |
PIN |
(+) 28VDC |
Body |
(–) Return |
Remark:
Return is achieved by connecting 4 supporting base holes to vehicle's chassis.